OCSMP Model Builder Intermediate Exam, Construct by Construct

OCSMP Model Builder Intermediate exam cover: a grid of SysML diagram types marked basic set or full set, with 90 questions and 55 to pass

The OCSMP Model Builder Intermediate exam (OMG-OCSMP-MBI300) tests whether you can build SysML v1.2 models with the full set of language constructs, not just the basic set. It has 90 multiple-choice questions, runs 105 minutes in native English-speaking countries, and you pass with 55 correct answers, or 61%.

On paper that is the lowest pass mark of the four OCSMP exams. The catch is the word "full". The Fundamental exam asks you to build each diagram with its basic constructs; the Intermediate exam goes back to the same diagrams and asks about the rarer parts: streaming pins, interruptible regions, history states, conjugated ports, generalization sets, trade studies. This note lists those constructs one diagram at a time, shows how the weights move between the two exams, and turns that into a study plan. Every figure was checked on OMG's own pages on 17 November 2026.

What does the MBI300 exam look like on paper?

OMG publishes a short information sheet for each exam in the OCSMP series. The figures below come from the Model Builder Intermediate exam information sheet, which also holds the full topic list and the reading list.

ItemWhat the information sheet says
Questions90, multiple choice (text and images)
Passing score55 of 90 correct, or 61%
Time105 minutes in native English-speaking countries, 135 minutes in all others
FeeUS$350 plus taxes
PrerequisitesPassing scores on the SysML Model User and Model Builder Fundamental exams
LanguageEnglish only; translation apps are not allowed
StandardSysML v1.2
Validity3 years from the exam date; the same or a higher-level exam extends it
DeliveryBooked through Pearson VUE, at a test center or online

The clock gives you about 70 seconds per question, or 90 seconds if you sit the exam in a country that gets the 135-minute allowance. OMG publishes no number of questions per topic area, so every question count in this note is an estimate made by multiplying the published weight by 90.

What changes between Model Builder Fundamental and Intermediate?

The two exams cover the same diagrams, but the weight moves toward behavior and structure. The comparison below sets the Intermediate sheet next to the Model Builder Fundamental information sheet, area by area.

Exam areaFundamental (MBF)Intermediate (MBI)Change
Behavior (activity, sequence, state machine)24%33%+9
Structure (block definition and internal block diagrams)23%29%+6
Parametrics10%11%+1
Requirements and use cases16%10%−6
Model concepts10%6%−4
Organizing the model (packages)9%6%−3
Stereotypes4% (apply one)5% (define them)+1
Allocation relationships4%not listed−4

Three things stand out. First, behavior and structure together grow from 47% to 62% of the exam, so about 56 of the 90 questions now sit in those two areas. Second, requirements and use cases shrink from 16% to 10%, and allocation relationships drop off the list. Third, stereotypes change in kind: at Fundamental level you only apply a stereotype, and the sheet says outright that creating profiles or stereotypes is not tested; at Intermediate level you define stereotypes, their properties and their constraints.

Portrait chart comparing SysML Model Builder Fundamental and Intermediate exam weights for behavior, structure, requirements and five smaller areas

Which behavior constructs does MBI add, and how many questions do they carry?

Behavior is the biggest area at 33%, which works out to about 30 questions. The sheet splits it across three diagram types and names the constructs for each.

Activity diagrams

  • Input and output flow: optional versus required pins, streaming, continuous and discrete rates, no buffer and overwrite, and token ordering such as FIFO and LIFO.
  • Data store and central buffer nodes, object node states and parameter sets.
  • Probabilities on flows.
  • Control: flow final nodes, decision input and join specification, control pins and interruptible regions.
  • Primitive actions, pre and post conditions, and properties defined on activities.

Sequence diagrams

  • Lifeline selectors, lifeline decomposition and activations, including nested activations.
  • Advanced interaction operators, and operators that are combined or nested.
  • Interaction use (references to other interactions) and gates.
  • Observations, timing constraints and state invariants.

State machine diagrams

  • The idea that a state machine describes the states of a block.
  • Graphical transition notation, internal transitions and deferred events.
  • Composite states and orthogonal composite states.
  • Pseudostates: junction, choice, shallow and deep history, fork and join, entry and exit points, and terminate.
  • Submachine states and connection points.

A useful test for yourself: for each item above, can you draw its notation from memory and say in one sentence what it changes in the model's meaning? OMG says its questions use text and images, so knowing what a symbol looks like matters as much as knowing its name.

Which structure constructs does MBI add?

Structure carries 29%, or about 26 questions. Here the sheet moves from "make a block and connect it" to the details that decide whether a model is precise.

Block definition diagrams

  • Block features: receptions, ordered and unique collections, read-only properties, property redefinition, constraint properties and distributed properties.
  • Relationships: shared versus composite aggregation (the white and black diamonds), association blocks and generalization sets.
  • Value types: enumerations and structured value types, such as a position vector with X, Y and Z parts.
  • Blocks and behavior: classifier behavior, owned behaviors and activity hierarchies shown on a block definition diagram.
  • Defining instances.

Internal block diagrams

  • Property-specific types and the notation for part multiplicities.
  • Flow ports: flow specifications and flow properties, conjugated ports, and the compatibility rules between ports and item flows.
  • Standard ports: required and provided interfaces, and typing a port with them.
  • Port delegation, for both flow ports and standard ports.
  • Connectors: nested connector ends, item flows and item properties, conveyed classifiers, and connector properties.

The exam is pinned to SysML v1.2, where flow ports and standard ports are the port model. Later v1 versions changed parts of that model, so check that your tool and your reading follow the SysML 1.2 specification rather than a newer version.

What do the five smaller areas ask for?

The remaining 38% is spread over five areas. Together they are worth about 34 questions, so skipping them is not an option, but each one is narrow enough to learn in a few hours.

AreaWeightAbout this many questionsWhat the sheet lists
Parametrics11%10Nested constraints, trade study support (Annex E.4), measures of effectiveness, objective functions, alternatives, constraining flows
Requirements5%4 to 5The Annex C requirement kinds (functional, interface, performance, physical, design constraint), derive, verify, satisfy, refine, trace and containment, tables and matrixes, test context and test case
Use cases5%4 to 5Relating use cases to activity diagrams, state machines and requirements
Model concepts6%5Applying modeling guidelines and practices
Organizing the model6%5Package and element import, view and viewpoint, model libraries, awareness of assessment criteria such as structured queries
Stereotypes5%4 to 5Defining stereotypes, their properties and constraints (extension, subclass)

Requirements are worth a careful look even though their weight fell. The full set brings in the specialized requirement kinds from Annex C of the specification and the difference between derive, refine, satisfy, verify and trace, which are easy to mix up under time pressure.

Which books and examples does OMG point to for MBI?

The reading list also moves. For Fundamental, the sheet points to chapters 3 and 4 of A Practical Guide to SysML (Friedenthal, Moore and Steiner, 3rd edition). For Intermediate it keeps chapter 4, the automobile example built with the basic feature set, and adds chapter 17, a residential security system modeled with the object-oriented systems engineering method.

Two further items show what "model quality" means at this level: chapter 2 of Estefan's survey of MBSE methodologies, which separates methodologies from processes, methods and lifecycle models, and Hoffmann's best-practice guide for systems engineering. The sheet also lists Weilkiens' books, the Cookbook for MBSE with SysML, the OMG SysML tutorial, Peak's parametrics primer, the hybrid SUV example model for SysML v1.2, and the SysML notations and conventions guide.

How could you plan your study hours?

OMG gives no study-hour figure. The plan below is our suggestion for a candidate who passed Fundamental recently and works in a SysML tool: about 50 hours, split roughly in line with the exam weights.

BlockHoursWhat to do
Behavior16Rebuild one activity, one sequence and one state machine with every construct on the sheet; check each against the specification notation
Structure14Add the full-set features to a block definition diagram, then wire an internal block diagram with flow ports, standard ports, delegation and item flows
Parametrics5Model a small trade study with two alternatives, a measure of effectiveness and an objective function
Requirements and use cases5Trace one requirement through derive, refine, satisfy and verify, and show it in a matrix
Organizing, concepts, stereotypes6Define a viewpoint and a view, a model library and one stereotype with a property and a constraint
Timed review4Work through mixed questions at about 70 seconds each, then reread the sheet line by line

If your Fundamental pass was a while ago, add a few hours at the start to rebuild the basic-set diagrams, because every full-set question assumes you already know them.

Do you need Model User and Fundamental before MBI?

Yes. The Intermediate sheet requires passing scores on both the Model User and the Model Builder Fundamental exams, and OMG's SysML certification overview describes Model User as the prerequisite to all the Model Builder exams. Model User has 90 questions in 90 minutes with a pass mark of 56 (62%), and Fundamental has 90 questions in 105 minutes with a pass mark of 60 (67%).

If the Model User step is still ahead of you, this short video from the ProcessExam channel walks through that first exam in the ladder.

Should you take MBI now or wait for SysML v2?

If your organization models in SysML v1, MBI is still the next step. OMG's SysML v2 certification page says existing OCSMP certifications will not be superseded and that new practitioners may enter either series based on the SysML version their organization uses. It also says the v2 Model Builder Fundamental exam is still being developed, with release expected in 2027, so for now the v2 series has only a Model User exam.

There is a link between the two series: holders of a valid OCSMP certificate get a reduced price on the v2 Model User exam. If you want to see how that v2 exam is built, our earlier note on where the SysML v2 Model User exam's 90 questions come from breaks it down.

What comes after MBI?

MBI is the only prerequisite step left before Model Builder Advanced, the top OCSMP exam. Advanced keeps the 90 questions and 105 minutes but raises the pass mark to 64 (71%) and moves away from diagrams toward methods, language extension and tool integration. Our note on which specification chapters to read first for the Advanced exam covers that level.

For a one-page view of the Intermediate topic areas next to the exam details, see this MBI300 syllabus summary.

Frequently asked questions

1. Is the Intermediate exam easier than Fundamental because its pass mark is lower?
Not necessarily. The pass mark is 55 of 90 (61%) against 60 of 90 (67%) for Fundamental, but the questions cover the full SysML construct set, including notation that many teams rarely use. A lower line does not mean easier questions.

2. Are allocations tested on MBI300?
The Intermediate sheet does not list allocation relationships as an area. They are worth 4% on Fundamental, and you still need to read models that use them, but there is no separate allocation section at this level.

3. Can I take the OCSMP Model Builder Intermediate exam in Japanese?
No. The Intermediate sheet lists English only, and translation apps are not allowed. OMG offers the Model User and Model Builder Fundamental exams in Japanese.

4. Does passing MBI extend my Fundamental certification?
The sheets say certifications expire 3 years after the exam date and that taking the same or a higher-level exam extends validity. Intermediate sits above Fundamental in the ladder, so under that wording a pass counts as a higher-level exam.

5. Which SysML tool should I practice in?
OMG does not name a tool. Use one that supports SysML v1 and shows the v1.2 notation, and build the hybrid SUV example from the reading list so you see every full-set construct in a working model.

Last updated 17 November 2026. Exam facts checked that day on OMG's SysML and SysML v2 certification pages and the four OCSMP exam information sheets.

Written by the team behind ProcessExam.

Comments

Popular posts from this blog

OCSMP Model Builder Advanced Exam: Which Specs to Read First

SysML v2 Model User Exam: Where the 90 Questions Come From